欢迎来到扬州惠乐机械装备有限公司网站!
咨询热线

13951053350

当前位置:首页  >  产品中心  >  景耀数控系列  >  数控硬轨滑台  >  URS300数控单向矩形硬轨滑台

URS300数控单向矩形硬轨滑台

简要描述:URS300数控单向矩形硬轨滑台:
导轨防护罩、伺服电机可根据需求加装配置。
Guide shield and servo motor can be configured according to requirements.

  • 产品型号:
  • 厂商性质:经销商
  • 更新时间:2023-02-14
  • 访  问  量: 257

详细介绍

 URS300数控单向矩形硬轨滑台

导轨防护罩、伺服电机可根据需求加装配置。

Guide shield and servo motor can be configured according to requirements.


特点(Characteristics)

自主研发制造,配合精密滚珠丝杆,做伺服传动;导轨表面均经过多次热处理等标准工艺,表面硬度更深,硬度≥ HRC55.

Independent research and development and servo drive is made with accurate ball screw; the surface of guide rail isprocessed with standard technology, such as several rounds of thermal process, etc.The surface hardness is higher,hardness ≥ HRC55.


主体精模高韧铸铁铸造,经人工震动时效及自然双重时效处理;降低应力增加抗变形能力和稳定性.

The housing is cast with accurate die and the cast iron of high toughness and processed by means of manualvibration aging and natural aging effect to reduce the stress and increase the deformation resistance performanceand stability.


滑台为工字型矩形导轨,其结构具有承载能力大、刚度高、热变形小、进给稳定性高的特性,从而保证了加工状态下(负荷下)的实际精度。

The slipway is the l-shaped rectangular slipway with high bearing capacity and rigidity and low thermal deformationand high feeding stability so that the practical accuracy under processing condition (load) can be assured.


导轨面配合工作台精密磨削加工并采用人工铲刮、刮花、配研技术调整镶条和接触面,最终精密装配完成。

The slipway surface willoperate with the work table to perform accurate grinding and cutting, and manual scraping,shoveling, running-in technology which is adjusted to gibs and contact surface are adopted to complete the finalaccurate assembly.


润滑系统采用内置控油器,保证每个接触面均匀润滑,有效提高滑台使用寿命。

The lubricating system adopts a built-in oil control device to ensure uniform lubrication of each contact surface andeffectively improve the service life of the sliding table.


 URS300数控单向矩形硬轨滑台技术参数:

1.jpg


产品咨询

留言框

  • 产品:

  • 您的单位:

  • 您的姓名:

  • 联系电话:

  • 常用邮箱:

  • 省份:

  • 详细地址:

  • 补充说明:

  • 验证码:

    请输入计算结果(填写阿拉伯数字),如:三加四=7